ANALYTICAL LABORATORY CXI TUL
services
The CXI TUL analytical laboratory operates in accordance with the requirements of the ČSN EN ISO 17025 (2018) standard and is accredited by the Czech Accreditation Institute under number L 1611. The entire portfolio of services offered can be found in the current Certificate of Accreditation.
The laboratory performs accredited sampling and analysis of drinking water, hot water, and bathing water, as well as inspections of sterilizers and autoclaves for external customers. As part of its services, the laboratory also ensures the transfer of results to the nationwide IS PiVo register.
The advantage of our laboratory is the state-of-the-art CXI equipment and personnel and short turnaround times for sample processing. Experienced laboratory staff also provide consultations in this area.
CONTACTS
Laboratory management
Ing. Lenka Lacinová, Ph.D.
tel: 485 353 012
mobile: 725 052 812
lenka.lacinova@tul.cz
DRINKING WATER ANALYSIS
Our accredited laboratory offers comprehensive drinking water analyses based on current legislation. The analyses comply with the requirements of Decree No. 252/2004 Coll., as amended. This decree sets out the hygiene requirements for drinking and hot water and the frequency and scope of drinking water inspections.We offer both the standard ranges specified by the decree and the option of individual selection of specific indicatorsaccording to customer requirements. The laboratory provides accredited drinking water sampling. Upon agreement and collection of special sampling containers, the customer can also perform the sampling themselves.
REDUCES ANALYSIS
Reduced analysis is used to verify the quality of drinking water sources, approve private buildings, and monitor water in commercial buildings. It provides information on key microbiological, physicochemical, and organoleptic indicators specified in Decree 252/2004 Coll., Annex 5.1.
COMPLETE ANALYSIS
The purpose of a complete analysis is to comprehensively analyze all indicators specified in Decree No. 252/2004 Coll., Annex 5.2. It is required by the relevant authorities, especially for commercial entities with an individual source of drinking water.
ANALYSIS PACKAGES
Individually selected indicators based on customer requirements and needs. TUL package (determination of Escherichia coli, coliform bacteria, Clostridium perfringens, colony counts at 36°C and 22°C, nitrates, nitrites, ammonium ions, chlorides, TOC, Fe, hardness (Ca + Mg content), pH, conductivity) provides basic information about microbial contamination and the chemical composition of water.
aNALYSIS OF WATER FROM VENDING MACHINES, WATERCOOLERS AND BOTTLED DRINKING WATER
We offer companies the opportunity to test whether the water from their installed vending machines complies with the requirements of Decree No. 252/2004 Coll. and is hygienically safe.
ANALYSIS OF WATER FROM SWIMMING POOLS, WHIRPOOLS AND BATHING AREAS
We perform accredited sampling and analysis of swimming pool water samples. Swimming pool water analyses comply with the requirements of Ministry of Health Decree No. 238/2001 Coll. as amended, or can be performed according to the individual needs of the customer. The frequency of sampling and analysis of the required indicators is determined by the decree (or the operating rules of the facility). The laboratory provides accredited sampling of bathing water.
WASTEWATER ANYLYSIS
We offer wastewater analysis to individuals who own, for example, domestic wastewater treatment plants, based on a decision issued by the relevant water authority. The scope of parameters determined for domestic wastewater treatment plants for the discharge of wastewater into groundwater according to Act No. 254/2001 Coll. on Water („Water Act“) §8(1)(c) is most often: BOD5, CODCr, undissolved substances, total phosphorus, ammoniacal nitrogen. Wastewater samples from domestic wastewater treatment plants are taken by the customer themselves according to the instructions specified in the Decision.
INSPECTION OF STERILIZERS AND AUTOCLAVES
We provide inspections of sterilization equipment efficiency to all healthcare facilities and other places where work tools are sterilized (pedicure salons, tattoo studios, etc.).
news
-
A book that travels. Voices that remain
On International Day of Women and Girls in Science (February 11), CXI TUL is launching a new community project aimed at connecting women in science through shared experiences and mutual inspiration. It is based on a simple but powerful principle: one book, twelve female scientists, and twelve voices over the course of a year. The…
-
Behind the Curtain of Digitalization: A Conference That Will Show the Reality of Digital Transformation
Today, digitization has a fundamental impact on the functioning of companies, public institutions, and entire regions. It is no longer just about introducing new technologies—the key is understanding the context, impact, and real possibilities for their practical application. These are the issues that will be addressed at the Behind the Curtain of Digitization conference, which…
-
Polish Marshal of the Lubusz Voivodeship Visits CXI TUL
On Wednesday, 28 January, the Institute for Nanomaterials, Advanced Technologies and Innovation (CXI) was visited by Sebastian Ciemnoczołowski, Marshal of the Lubusz Voivodeship. The meeting was also attended by the former Rector of the Technical University of Liberec, Assoc. Prof. Miroslav Březina, the incoming Rector Assoc. Prof. Aleš Kocourek, and representatives of the Liberec Region,…
-
3D printing in practice: when technology meets corporate reality
Companies considering introducing 3D printing or wanting to streamline its use in practice met with researchers and experts in the field of additive technologies at the SUPPORT4SME project workshop. The program offered a comprehensive introduction to FDM 3D printing, an overview of materials and software, and practical demonstrations that helped participants better understand the possibilities…
-
3D printing under the microscope: Libor Horáček on possibilities that know no bounds
„Would you like to take a ride in the minibus?“ asks Libor Horáček, opening the door to a renovated Volkswagen Transporter that he modified himself, including 3D-printed push-lock locks. He enthusiastically explains the principle of their printing, preparing me for an interview that will reveal the unlimited possibilities of 3D printing at CXI TUL. From…
-
CXI TUL in 2025: stable foundation, visible results and further direction
The year 2025 brought concrete results and awards that confirmed the quality of our institution’s research and strategic steps. CXI TUL is thus moving towards a stronger position and a clearly defined direction for the next decade. If 2024 was about financial stability, 2025 was also about outputs. And those that were noticed by the…
-
65 minutes of science. The President at CXI TUL
He had about an hour to visit. But it was enough to make it clear that this was not a formal stop. When President Petr Pavel and his wife visited the Institute for Nanomaterials, Advanced Technologies and Innovations of TUL, they did not come just to look. They asked questions, took notes and tried to…
-
A six-month internship that will change the direction of your doctoral research and your life.
An experience that will open doors to international science, new friendships, languages, and self-confidence. The story of Tomáš Dufek, who completed an internship at the Catalan Institute for Water Research (ICRA), shows that a few months abroad can have a profound impact not only on professional growth but also on personal life. From cutting-edge water…
-
Brazilian delegation at CXI TUL: joint search for smart and sustainable solutions
On November 28, the Institute for Nanomaterials, Advanced Technologies and Innovation at the Technical University of Liberec (CXI TUL) welcomed an important Brazilian delegation consisting of mayors, regional leaders, urban development experts, and representatives of innovative organizations. The visit was part of an international mission led by the Association of European Border Regions (AEBR), whose…
-
Giving Tuesday: CXI TUL joins with corporate support.
Tuesday, December 2, marks the culmination of Giving Tuesday—a day that turns intentions into real acts of generosity. At the Center for Nanomaterials, Advanced Technologies, and Innovation (CXI TUL), we are also using this day to take stock and make a final push. CXI TUL: Finalist for prestigious awards alongside major companies To mark the…
The archive of all CXI TUL News is available here.
TEAM AnalyticAL laboratoRY CXI TUL
RNDr. Alena Ševců Ph.D.
Ing. Lenka Lacinová Ph.D.
Hana Pohlreichová
Daniela Myšáková
Mgr. Martin Pusztai Ph.D.
Ing. Alice Břečková
Ing. Denisa Sokolová
INSTRUMENTS
Daniela Myšáková
T: +420 485 35 38 49
E: daniela.mysakova@tul.cz
Stanovení forem uhlíku (TOC, DOC, TIC) a celkového dusíku (TN) ve vodných vzorcích.
Hana Pohlreichová
T: +420 485 35 38 49
E: hana.pohlreichova@tul.cz
Stanovení celkové rtuti ve vodných a pevných vzorcích.
Daniela Myšáková
T: +420 485 35 38 49
E: daniela.mysakova@tul.cz
Stanovení nízkých koncentrací aniontů ve vodných vzorcích
RNDr.Stanislava Vrchovecká
T: +420 485 35 39 37
E: stanislava.vrchovecka@tul.cz
Klíčení, hydroponie, expozice vůči toxickým látkám, pevné substráty – růstové experimenty s rostlinami
Ing.Martin Palušák
T: +420 485 35 39 37
E: martin.palusak@tul.cz
Ultrastopová analýza prvků v kapalných (vodných) vzorcích, v pevných vzorcích po rozkladu. Stanovení koncentrace iontů a velikosti nanočástic.
Mgr.Vít Novotný
T: +420 485 35 31 25
E: vit.novotny@tul.cz
Stanovení polárních mikropolutantů a jejich metabolitů v environmentálních matricích (pesticidy, farmaka, aditiva, …). Možnost necílového monitoringu.
Mgr.Vít Novotný
T: +420 485 35 31 25
E: vit.novotny@tul.cz
Stanovení polárních polutantů ve vodách
Mgr.Vít Novotný
T: +420 485 35 31 25
E: vit.novotny@tul.cz
Stanovení polárních látek, molární hmotnost polymerů v GPC módu
Ing.Vojtěch Antoš, PhD.
E: vojtech.antos@tul.cz
Stanovení nepolárních polutantů v environmentálních matricích.
Ing.Vojtěch Antoš, PhD.
E: vojtech.antos@tul.cz
Stanovení těkavých organických látek a permanentních plynů ve vodách
Ing.Vojtěch Antoš, PhD.
E: vojtech.antos@tul.cz
Stopové stanovení perzistentních polutantů v environmentálních matricích.
Mgr.Daniele Silvestri, Ph.D.
T: +420 485 35 38 38
E: daniele.silvestri@tul.cz
Monitoring plynných polutantů v reaktorech
Mgr.Daniele Silvestri, Ph.D.
T: +420 485 35 38 38
E: daniele.silvestri@tul.cz
Vysoušení vzorků, příprava aerogelů
Mgr.Daniele Silvestri, Ph.D.
T: +420 485 35 38 38
E: daniele.silvestri@tul.cz
Určení velikostní distribuce nanočástic
Ing. Sabrin Issam Abdallah
E: sabrin.abdallah@tul.cz
Příprava nanokatalyzátorů s asistencí laseru
Ing. Martin Palušák
E: martin.palusak@tul.cz
Měření a analýza struktury materiálů - určení krystalové struktury, identifikace fází, určení mikrostruktury.
Ing. Martin Palušák
E: martin.palusak@tul.cz
Stanovení vybraných prvků v kapalných (vodných) vzorcích, v pevných vzorcích po rozkladu.
Institute for Nanomaterials,
Advanced Technology and Innovation
Studentská 1402/2
office:
Bendlova 1409/7 – budova L
460 01 Liberec 1
T +420 485 353 852
M +420 725 836 913
Stay in touch
Designed with WordPress