ANALYTICAL LABORATORY CXI TUL
services
The CXI TUL analytical laboratory operates in accordance with the requirements of the ČSN EN ISO 17025 (2018) standard and is accredited by the Czech Accreditation Institute under number L 1611. The entire portfolio of services offered can be found in the current Certificate of Accreditation (www.cai.cz/?subjekt=1611-technicka-univerzita-v-liberci).
The laboratory performs accredited sampling and analysis of drinking water, hot water, and bathing water, as well as inspections of sterilizers and autoclaves for external customers. As part of its services, the laboratory also ensures the transfer of results to the nationwide IS PiVo register.
The advantage of our laboratory is the state-of-the-art CXI equipment and personnel and short turnaround times for sample processing. Experienced laboratory staff also provide consultations in this area.
CONTACTS
Laboratory management
Ing. Lenka Lacinová, Ph.D.
tel: 485 353 012
mobile: 725 052 812
lenka.lacinova@tul.cz
DRINKING WATER ANALYSIS
Our accredited laboratory offers comprehensive drinking water analyses based on current legislation. The analyses comply with the requirements of Decree No. 252/2004 Coll., as amended. This decree sets out the hygiene requirements for drinking and hot water and the frequency and scope of drinking water inspections.We offer both the standard ranges specified by the decree and the option of individual selection of specific indicatorsaccording to customer requirements. The laboratory provides accredited drinking water sampling. Upon agreement and collection of special sampling containers, the customer can also perform the sampling themselves.
REDUCES ANALYSIS
Reduced analysis is used to verify the quality of drinking water sources, approve private buildings, and monitor water in commercial buildings. It provides information on key microbiological, physicochemical, and organoleptic indicators specified in Decree 252/2004 Coll., Annex 5.1.
COMPLETE ANALYSIS
The purpose of a complete analysis is to comprehensively analyze all indicators specified in Decree No. 252/2004 Coll., Annex 5.2. It is required by the relevant authorities, especially for commercial entities with an individual source of drinking water.
ANALYSIS PACKAGES
Individually selected indicators based on customer requirements and needs. TUL package (determination of Escherichia coli, coliform bacteria, Clostridium perfringens, colony counts at 36°C and 22°C, nitrates, nitrites, ammonium ions, chlorides, TOC, Fe, hardness (Ca + Mg content), pH, conductivity) provides basic information about microbial contamination and the chemical composition of water.
aNALYSIS OF WATER FROM VENDING MACHINES, WATERCOOLERS AND BOTTLED DRINKING WATER
We offer companies the opportunity to test whether the water from their installed vending machines complies with the requirements of Decree No. 252/2004 Coll. and is hygienically safe.
ANALYSIS OF WATER FROM SWIMMING POOLS, WHIRPOOLS AND BATHING AREAS
We perform accredited sampling and analysis of swimming pool water samples. Swimming pool water analyses comply with the requirements of Ministry of Health Decree No. 238/2001 Coll. as amended, or can be performed according to the individual needs of the customer. The frequency of sampling and analysis of the required indicators is determined by the decree (or the operating rules of the facility). The laboratory provides accredited sampling of bathing water.
WASTEWATER ANYLYSIS
We offer wastewater analysis to individuals who own, for example, domestic wastewater treatment plants, based on a decision issued by the relevant water authority. The scope of parameters determined for domestic wastewater treatment plants for the discharge of wastewater into groundwater according to Act No. 254/2001 Coll. on Water („Water Act“) §8(1)(c) is most often: BOD5, CODCr, undissolved substances, total phosphorus, ammoniacal nitrogen. Wastewater samples from domestic wastewater treatment plants are taken by the customer themselves according to the instructions specified in the Decision.
INSPECTION OF STERILIZERS AND AUTOCLAVES
We provide inspections of sterilization equipment efficiency to all healthcare facilities and other places where work tools are sterilized (pedicure salons, tattoo studios, etc.).
news
-
MiReCC Project: Post-mining landscape restoration begins at CXI
On Tuesday, April 28, 2026, an informal meeting of representatives from institutions involved in the project “Reclamation of Mining Heritage under Climate Change Conditions” (MiReCC) took place at the Institute of Nanomaterials, Advanced Technologies, and Innovation (CXI) at the Technical University of Liberec. The project is being implemented under the Interreg Saxony–Czech Republic 2021–2027 cross-border…
-
CXI TUL Hosts Meeting Between New TUL Management and Journalists
The first meeting between the new management of the Technical University of Liberec and journalists took place at the Institute for Nanomaterials, Advanced Technologies and Innovation, CXI TUL. Miroslav Černík also attended the meeting on behalf of CXI TUL. The new university management presented the main priorities that will shape the direction of TUL in…
-
Interview with Veronika Leová: From „Crazy Scientist“ to Professional Research
The life of a scientist isn’t just about wearing a white lab coat; it’s also about international internships, endless reading of articles, and searching for answers to questions no one has asked before. Veronika Leová initially had no idea what working in research entailed. Today, as a doctoral student at the CXI TUL institute in…
-
AI Monitors 3D Printing During the Production of Molds for Cars and Airplanes
Instead of time-consuming machining, large-format 3D printing is taking over, a process that monitors and continuously adjusts itself during production. This is the foundation of the Czech-German AI4MultiDirectAM project, whose ambition is to transform the production of molds for composite parts into a faster, more precise, and more cost-effective process. Molds for composite parts, such…
-
Smarter Site Remediation? AI Can Help
Cleaning up a contaminated site isn’t just about taking action; it’s mainly about correctly interpreting what’s happening beneath the surface. That’s where the decision is made as to whether the intervention will be fast, effective, and cost-efficient. A new project is therefore relying on artificial intelligence to uncover hidden connections from available information and help…
-
Companies can get help from top experts at TUL for a song
How good is the weld or surface finish on my product or a product I received? Was the defect caused by improper handling, or did the product have a hidden material defect? These are examples of questions that the team at the TUL CXI University Research Institute can resolve very quickly. Thanks to the SUPPORT4SME…
-
From wastewater back to production. Technology that is transforming industrial water recycling
Membrane modules that return valuable substances from wastewater back to production while protecting the environment. A team from CXI TUL is working on their development in collaboration with MEGA Group and MemBrain. When designing new industrial equipment, they use computer modeling and 3D printing, which speeds up, refines, and reduces the cost of the entire…
-
Behind the Scenes of Digitalization: Bringing Together Companies and Experts
Artificial intelligence, law, cybersecurity, and concrete experiences from digital transformation. The Behind the Curtain of Digitalization conference in Liberec demonstrated that digitalization is no longer merely a technological topic, but a key factor in the competitiveness of companies, institutions, and regions. The conference program offered a diverse perspective on digitalization from various angles. Topics discussed…
-
SmartMold: Faster Production? With a Smart Mold
The SmartMold project demonstrates that a mold doesn’t have to be just a rigid tool that holds the product’s shape. It’s much better if it’s an active part of the entire process. It can heat itself and help control production so that it’s faster, more precise, and more cost-effective. 3D printing, molds, simulation, recycling In…
-
A Toxic Past as an Opportunity? SURRI Shows a New Way
There are places that seem like reminders of mistakes that can never be undone. Old uranium mines, contaminated water, and landscapes scarred by industry. But this is precisely where a turning point is emerging. After three intensive years, the SURRI project demonstrates that old mining sites need not be merely symbols of an ecological debt,…
The archive of all CXI TUL News is available here.
TEAM AnalyticAL laboratoRY CXI TUL
RNDr. Alena Ševců Ph.D.
Mgr. Martin Pusztai Ph.D.
Ing. Lenka Lacinová Ph.D.
Hana Pohlreichová
Daniela Myšáková
INSTRUMENTS
Daniela Myšáková
T: +420 485 35 38 49
E: daniela.mysakova@tul.cz
Stanovení forem uhlíku (TOC, DOC, TIC) a celkového dusíku (TN) ve vodných vzorcích.
Hana Pohlreichová
T: +420 485 35 38 49
E: hana.pohlreichova@tul.cz
Stanovení celkové rtuti ve vodných a pevných vzorcích.
Daniela Myšáková
T: +420 485 35 38 49
E: daniela.mysakova@tul.cz
Stanovení nízkých koncentrací aniontů ve vodných vzorcích
RNDr.Stanislava Vrchovecká
T: +420 485 35 39 37
E: stanislava.vrchovecka@tul.cz
Klíčení, hydroponie, expozice vůči toxickým látkám, pevné substráty – růstové experimenty s rostlinami
Ing.Martin Palušák
T: +420 485 35 39 37
E: martin.palusak@tul.cz
Ultrastopová analýza prvků v kapalných (vodných) vzorcích, v pevných vzorcích po rozkladu. Stanovení koncentrace iontů a velikosti nanočástic.
Mgr.Vít Novotný
T: +420 485 35 31 25
E: vit.novotny@tul.cz
Stanovení polárních mikropolutantů a jejich metabolitů v environmentálních matricích (pesticidy, farmaka, aditiva, …). Možnost necílového monitoringu.
Mgr.Vít Novotný
T: +420 485 35 31 25
E: vit.novotny@tul.cz
Stanovení polárních polutantů ve vodách
Mgr.Vít Novotný
T: +420 485 35 31 25
E: vit.novotny@tul.cz
Stanovení polárních látek, molární hmotnost polymerů v GPC módu
Ing.Vojtěch Antoš, PhD.
E: vojtech.antos@tul.cz
Stanovení nepolárních polutantů v environmentálních matricích.
Ing.Vojtěch Antoš, PhD.
E: vojtech.antos@tul.cz
Stanovení těkavých organických látek a permanentních plynů ve vodách
Ing.Vojtěch Antoš, PhD.
E: vojtech.antos@tul.cz
Stopové stanovení perzistentních polutantů v environmentálních matricích.
Mgr.Daniele Silvestri, Ph.D.
T: +420 485 35 38 38
E: daniele.silvestri@tul.cz
Monitoring plynných polutantů v reaktorech
Mgr.Daniele Silvestri, Ph.D.
T: +420 485 35 38 38
E: daniele.silvestri@tul.cz
Vysoušení vzorků, příprava aerogelů
Mgr.Daniele Silvestri, Ph.D.
T: +420 485 35 38 38
E: daniele.silvestri@tul.cz
Určení velikostní distribuce nanočástic
Ing. Sabrin Issam Abdallah
E: sabrin.abdallah@tul.cz
Příprava nanokatalyzátorů s asistencí laseru
Ing. Martin Palušák
E: martin.palusak@tul.cz
Měření a analýza struktury materiálů - určení krystalové struktury, identifikace fází, určení mikrostruktury.
Ing. Martin Palušák
E: martin.palusak@tul.cz
Stanovení vybraných prvků v kapalných (vodných) vzorcích, v pevných vzorcích po rozkladu.
Institute for Nanomaterials,
Advanced Technology and Innovation
Studentská 1402/2
office:
Bendlova 1409/7 – budova L
460 01 Liberec 1
T +420 485 353 852
M +420 725 836 913
Stay in touch
Designed with WordPress